Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I received an SRE without software
II tried to use this process to enable it :
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel8_6/install/CUE_86_install/boothelp.html
I checked the md5 for the downloaded files.
Here it is what happen...
On an ASR1001-X, I tried to limit the rate of a subinterface and apply priority on specific traffic.
But I can't apply the policy on the subinterface.
Is there another way to do it. Without the priority level 2 it works.
class-map match-all Class-C...
Hi, I'm looking for information on the placement of service on an ASR903.Do you have internal switching on a Gigabit Ethernet Card or does it go to the RSP for packet switching?Do you have internal cache on a Gigabit Ethernet Card?Do you have ASICs p...
I have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerber...
Hello,Is there some patch requirement for SNMPv3 on the NAM appliance ?I tried to do SNMPv1 on a 6509 with VSS it works fine and I could capture the packet of the SNMP request.If I tried to move to SNMPv3, the communication failed and there is no SNM...
I don't see the problem based on RFC2132 or RFC5494.In RFC2132:The client identifier MAY consist of type-value pairs similar to the 'htype'/'chaddr' fields defined in [3]. For instance, it MAY consist of a hardware type and hardware address. In t...
Hello, - Many potential issue... - Is it EBGP or IBGP?- May be hold-time too short.- May be overload CPU.- May be inconsistent Keepalive/hold time.- May be network flapping in the middle...C.
Well... best source of information for BGP, in my point of view, is the book from Bassam Halabi : Internet Routing Architectures.In Cisco Training, mainly, you've got configuration information but not that much design information.
If I deactivate "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)"I don't even have a login screen on the NACagent. I used msi version 4.8.2.1
