Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone!I did play hard with my c 3750 v2 and have decided to put myself in a trial. The reason: I want to be prepared for unpleasant surprises that may occur in the future for any reason. I've done a similar recovery on AIR-CAP2702I-Z-K9 but it ...
Hi everyone, Several hours ago I've posted a review on recovering an old 3750 switch via ROMmon after erasing its flash.I was going to do some edit but unfortunately couldn't get into my discussion using the link in my profile.https://community.cisco...
Quick guide for Xmodem feature (file transfer via Console line) for old devices alike c3750 Prerequisites:1) .bin image suitable for your device flash size (actually, the smaller size the faster device will get it. Especially recommended for those wh...
Hi everyone, Being trying to make a backup of a switch/router/ap I'm often getting stuck as archive tar /create ... fall on me with the Permission-denied error. Usually, this error caused by the private-config.text and multiple-fs which are mapped to...
Joseph,The c3750v2 is really old stuff with no USB ports. I wouldn't moke around if the USB port is there. No TFTP in ROMMON and only Console connection available. The article is dedicated to the recovery process of this particular kind of device. Th...
I was struggling with getting DHCP addresses behind PoE on WLC2504. For both APs and clients. I've got a satisfactory result by disabling DHCP proxy via GUI CONTROLLER>Advanced>DHCPDHCP scope on WLC (10.0.0.24) configured as intended and pointing to ...
I was facing this problem on all my devices with the GUI files installed and the HTTP(s) service enabled. Except for AP. The AP running config doesn't have the ip http authentication local line and the GUI works as intended. That's different.Balaji, ...
They are going to be a very small part. The output on a 3560X switch with WebGUI enabled and working.S3560X#dir nvram:Directory of nvram:/513 -rw- 3188 <no date> startup-config514 ---- 1916 <no date> private-config515 -rw- 3188 <no date> underlying-c...
According to the official documentation:On the switch platforms such as Catalyst 2950, 2960, 3550, 3560, 3650, 3750, 3850, the NVRAM is not truly physically present. Instead, a part of the FLASH memory is used to store the NVRAM contents. In other wo...
