Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have two Cisco Nexus C93240YC-FX2 that we are connecting a Citrix Netscaler SDX to. We are setup with a portchannel on the Netscaler with a link going to Switch A and a link to Switch B. On the switch side, we are setup with a single link portchan...
Anyone have any issues with CCX based RTLS environments when using AP3802I series access points? Other models such as the 1142's and 3500s work fine. Code is on the older side 8.2 but I've also tried 8.5 without any success. I've also tried both 5508...
Anyone have any ideas why some traffic is slow when traversing a MPLS VPN WAN. My FTP copies are fast but any windows copy or windows file transfers are slow. The windows copies are about three times as slow as the FTP transfers. Is there anything th...
Several of my older netscreen devices only support radius authentication and I'm having trouble migrating them from ACS 4.2 to ACS 5.1. When I try to authenticate, the authentication passes in ACS but it doesn't log you into the Netscreen (you see a ...
I've been reading some of the forums and it seems a lot of people are having trouble with iPhones and iPads on the wireless network. Well, I am as well. I have several wlans (all with different security wpa/psk, wpa2 enterprise, etc.) on our enterpri...
One thing I did notice is the error message with CCX on the b radio. It just so happens the RTLS tags all us the b radios. Command Outputs(Cisco Controller) >show advanced 802.11a ccX global 802.11a Client Beacon Measurements: enabled with (inter...
It does not seem like CCX works or there is additional configuration needed for this series.. We have several CCX based RTLS tags that work just fine except in areas where there are 3800 series access points. There is just no signs of any CCX traffic...
