Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I am seeing this error keep popping up in the router ISR4351 logs. Not sure what is causing this.%PLATFORM-4-ELEMENT_WARNING: SIP1: smand: RP/0: Used Memory value 93% exceeds warning level 88%Router ver: 16.6.7Similar router elsewhere with sa...
Hi guys,I have a stack of 4 x 3850s running 3.6.10E. License is permanent IP Services.Question is, if I upgrade to 16.12.10, what will happen to this RTU license? I need to use object groups and this version does not seem to support that function. I ...
Yes this is what I eventually did. It is working now. As someone here said before, many settings are on/off by default. So do take care.For example, SNMP did not work until the service is turned on in "TCP/UDP" section.Will I buy this switch model ag...
I had the same issue with a CW9164I-ROW in India. All you had to do was to set the country code in the "AP Join" profile.Once you do that, the AP works fine. Setting the country code on the AP config is not sufficient.
Hi Leo,For direct replacement of C1000-8P-2G-L, this is what Cisco site recommended. I wonder why they did that then. Check this site:https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-1000-series-switches/catalyst-1000-series-switch...
It is not IOS and a open source OS:v4.0.0.91 / RLSB4.0_950_778_036Active-image: flash://system/images/image1.binVersion: 4.0.0.91MD5 Digest: 5e834beda25a2dd18c3bDate: 14-Mar-2023Time: 05:36:46Inactive-image: flash://system/images/_image1.binVersion: ...
