Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I have a CUCM Mixed mode cluster with encrypted Signaling and Secure RTP and i have setup a connection via a Cisco Cube with Direct Routing to MS Teams.
The CUCM to Cube Sip trunk is Secure with Secure SIP and SRTP, and of course the Direct Roun...
Hi,
I have an implementation where i Have a Lan interface without VRF (in picture x.x.101.100) and 2 Sip Trunks with different Wan interfaces on VRF SIP-CLX and SIP-CES.
Inbound, outbound calls everything works well signaling and audio without inser...
Hi,
I'm receiveing a date on a string with the format "mm/dd/yyyy" and need to convert into a date so that it could be prompted with a Generated Prompt type date.
If i set directly the date will not be correct.
Whats the best way to convert the st...
I'm implementing a socialminer chat on a customer, and i'm trying to use http, because i've a problem on the internal DNS that cannot resolve de public domain, so i have the socialminer on the DMZ with the internal domain, connected to the UCCX, and ...
I've configured an 7811 and an 7821 on a CME Version 11.6, and everything is working but i cannot find anywhere the phone code to change the locale, and on the official documentation it only appears the phones below.
Anyone knows if locales are supp...
Hi Koen,
Unfortunatelly not, got stuck there and went to the option of MTP with no SRTP.
Didn't manage to put it to work, it deserved a TAC case to clarify what can be done but since the customer accepted it this way, i didn't opened it.
Regards
LL
Hi Jonathan,
Thanks for the reply.
I've re-checked the documents (they where the base for the config) and i cannot see differences from my config, and they both assume:
- The trunk between CUBE and Microsoft Phone System uses TLS/SRTP- The trunk betw...
It's the other way around.
"Starting from Release 11.5(1)SU9, and any subsequent SU or ES releases in this release train, Cisco JTAPI Client for Linux, and Windows will be available as the zip file (.zip) "
https://www.cisco.com/c/en/us/td/docs/voice...
Hi Ptegan,
Check the CCBU Logs of the PG, because from what i remember you have a PUT on the AW towards the PG (the IP 10.25.210.40 is probably your PG) and then on the PG CCBU logs you should see the GET to the CUCM with the file that it is trying t...
Just for the info the failing of the Jtapi download from the CUCM 11.5 SU9 or up ended on a defect. Rigth now the only option is to upgrade the CUCM first.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwi01998
Regards
Luis Liborio
