Hi, I'm configuring a 3750 switch with a ISP provider using MHSRP on its side. Actually I'm using two GigaEthernet connections.I wanna create load balancing from my side using static routes but the traffic flows I see are not equal neither similar. r...
Hi, I have a Cisco 1861 Integrated Services Router using the voice service, with 3 VoIP phones.At first, I made a configuration with a LAN voice 172.22.0.0/24, working everything OK.I'm trying to make a second configuration, with a LAN voice 172.16....
Hi,I have a Cisco 1861 Integrated Services Router with 4 FXS ports and 2BRI.Well, as it is known, the FSX ports is for telephones, fax, etc.My deal is to connect the router to the PSTN network with a single RTC thru a analog port, but I'm not sure ho...
As I know, that's not directly possible, because the ADSL WAN is a back-up from the main line.Anyway, if you want to split the destination, may be you can use metrics to make a manual balance (thru ip route commands).Cheers!
I reply to myself:The following message:CNF-FILES: Clock is not set or synchronized, retaining old versionStampsIs due to i had no the specific clock configuration entered as configuration terminal mode.In other words, setting up the clock is not eno...
Hi,Problem solved. If I change the LAN range, i've to create the cnf files.Thats a little bit disturbing, because my objective is to load different configs with the commandcopy flash:configNEW.conf startup-configand now I have to rebuild manually tha...
Hi,Yes, the configuration works correcty if set 172.22.x.x as voice VLAN.I'll try to rebuild the cnf-files, because it's the last thing i have to try.I'm a little scared about rebuild this. Next monday I have to make a conference with the equipment, ...
.jpg "Hall of Fame Master"){kind=icon}
