Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We currently have 2- Cisco CUSP 10.2 and we have notification that the product is EOL with no replacement. Does anyone have a work around to remove the CUSP or equipment to replace the CUSP? Let me know if you have any questions. I sent config...
Hello,I have spent a considerable amount looking through Solarwinds docs and Cisco Docs but neither compliment each other. I have spent a ton of time adding and removing IPSLA parameters with no luck? I am trying to setup all VoIP SIP parameters inc...
Hello,We have a call manager 10.5 and several MTP routers, We are needing to stop any call on each MTP router, reset the router and enable the router, to clear any MTP issues. We were told at one point by Cisco to login to the CUCM and uncheck the M...
My NMT (Solarwinds) team is seeking Keep alive to be setup for our Cisco Cubes, everything that I am reading is showing a need for programming each dial peer for keep alive, we have no groups on our cubes, and we have 1000's of dial peers, is there a...
I have a few cisco cubes with different providers! Is there an easy way to calculate max outbound calls per second, per cube? I am struggling- CUIC/RTMT/CUCM/CLI? Any help or direction would be appreciated. Would like to do last 30 days or all hist...
Ok I have udp jitter working and MOS/jitter/latency/packet loss, however this is not registering in SW? what the heck is missing?phx1-r1r1-cube4-vht1#debug ip sla tracephx1-r1r1-cube4-vht1#debug ip sla errorphx1-r1r1-cube4-vht1#show ip sla statistic...
I have a primary ASR as the source and yes I have a secondary ASR as the IP SLA responder. My issue is that this does not register with the Solarwinds Network monitoring tool.cmp-echo 172.30.ASR ROUTER source-ip 172.30.ASR router (Another ASR router...
Thanks, The configuration don't work but here it is. I have backed everything out and started with the basics, ICMP echo & a ip sla responder. 172.30.x.xxx, SNMP v3 and Community stringversion 16.6service tcp-keepalives-inservice tcp-keepalives-outr...
@balaji.bandiMy goal is to get the IPSLA parameters to register with Solarwinds for alerts and notifications for our Voice Network. We have 7 cubes with different service providers, the business wants to monitor the voice traffic traversing the cubes...
That's the DN number it does not show the DID- Am I missing something here? They want to see the DID number and who its currently assigned to. A downloadable list of DID/DN association would be nice. Is this possible?
