Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
After a recent upgrade to IOS 12.4(15)T1 & CME 4.1, the DND feature no longer works on any of the phones. The softkey is there, but pressing it does nothing.Is this a known issue or does anyone have a solution for this? We need the DND key to ensure ...
We've been running CME for a while here now, but for some reason, the Local Directory refuses to display on the 7905 and 7912 phones. This has remained consistent through different phone firmware versions and CME upgrades.The directory works fine on ...
I have the requirement to rate-limit egress traffic from a particular gig port on a Sup32 in a 7600 router. All 4 egress queues are in use; I need to limit total output throughput on the port - not just one particular queue.I know the Sup32 doesn't ...
I have a problem whereby a particular wireless client is choosing to associate with the root bridge rather than with a nearer non-root AP which has a much stronger signal. As a result, the client is experiencing dropouts due to the poor signal to the...
Does anyone know whether Callmanager Express supports call deflection? I'm interfacing to the PSTN using Q.931 over BRIs and would like to be able to perform forward on no answer without tying up two B channels.
Sorry, haven't resolved this - the usual issue of putting the needs of clients' networks ahead of our own I expect an IOS version change will probably fix the issue though since the problem wasn't apparent until we upgraded.
How odd.I notice that bug only lists the 7912 - I will try the same updates (with 7912G firmware) in the next couple of days and see if this helps - to date I've only been dealing with the 7905s.The firmware is loading correctly on the 7905 with each...
Thanks for the further advice. I just tried 8.0.2 and 8.0.3 from the 7900 firmware download area and these also had the same problem - no directory and the directory URL setting under network configuration is blank.I should correct my earlier post al...
