Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a question about the Auto Attendant in Unity Express. One of our mandates for this location is being able to get caller id from calls originating from the LEC after it goes through the attendant. I am not extremely familiar with the Unity Ex...
I changed the region of the controller from Greece to UK which required a reboot. When rebooting all of the APs came up except for one AP. I tried to shut/no shut the port multiple times as well as wipe the the port config and re-configured it to t...
I have some clients connected to our cisco Wireless LAN controller (4402) and they are running vmware fusion 2. When connected to the wireless network their host machines do not aquire a IP when using DHCP. If you type in the IP manually it all works...
We are building out a new datacenter and have 1 x physical connection with a /30 for each pair of ASR routers, one for the incoming traffic pair and one for the outgoing pair. The ISP will not provide a second line from the same subnet, nor will it ...
We did that as well. Here is what I found out from an internal Cisco resource.The WLC software does not support multiple DHCP client instances running on a wireless client. There is no workaround for this, as only wireless clients registered with WLC...