Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I really don't understand what's going on. Maybe I'm wrong, maybe not. But.I got a call on my voice-port 0/2/0. But my cisco matches the wrong dial-peer. This dial-peer matches by trunk group "common" which has port 0/0/1-0/0/3 (0/2/0 is not ...
Hello,We have CUBE configuration SIP <-> H.323 (CUCM 8.6)Calls are delivered as follows:IPTSP<--sip-->CUBE<--h.323-->CUCM<-->phone When I'm calling from inside to outside (From the phone to PSTN by IPTSP) DTMF is working just fine.But when I'm calli...
Hi,I'm trying to set backup for some cue.It's cue 8.6.4 on ISM-SRE-300-K9.I've made some test sftp server based on FreeBSD.I tested how it works from FreeBSD console and by winscp.It works finemgmt-u# sftp sftp@10.0.0.5Password:Connected to 10.0.0.5....
Hello,I've working configuration on IOS 12.4.24T6. Everything are working just perfect. But when I migrate to new ios (15.0-1M8) I got the error below in debug ip dhcp server. How I can fix that? Or I have just one way - open ticket in the TAC?rr1-ah...
Hi,I've got very strange issue on two of my routers.I've pretty straightforward tunnel configuration:interface Tunnel0 ip address 10.5.4.66 255.255.255.252 ip mtu 1390 ip virtual-reassembly ip tcp adjust-mss 1350 ip ospf authentication message-digest...
Hello Joe, I had the same issue a week ago. I tried everything to fix it remotely. Nothing helped. Then I asked local guys to make settings reset on the phone:http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8831/9_3_3/english/adminguide/CS3...
Hi Chris,Why do you think that I don't have an incoming dial-peer for h.323?1. The 205 is incoming dial-peer for h.323 from my point of view and from Cisco ios point of view (it is matched correctly)2. Call h.323 -> sip is working just fine. So incom...
