Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a question regarding EVPN Multihoming for Non-Fabric Networks on Catalyst 9000 following this documentation:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-18/configuration_guide/stck_mgr_ha/b_1718_stc...
Hello,I am facing an issue deploying Nexus Dashboard 3.2.2 OVA, when it gets to the boot phase of "Please wait for system to boot" it keeps restarting at 0% every time it reaches 29%.I installed it following this guide:https://www.cisco.com/c/en/us/t...
Hello,After migrating from a Cisco WLC 5520 to a 9800 I am having a strange behavior for particular clients. On a given SSID with Do1x authentication I get clients able to authenticate and very particular one not. After some radioactive tracing I see...
Hello everyone, I would need some help understanding an phrase writen in a Cisco manual about UDLD:"UDLD supports two modes of operation: normal (the default) and aggressive. In normal mode, UDLD can detect unidirectional links due to misconnected po...
Hi,I am facing an issue with my LAN, I have a router Cisco 1921 and behind a switch Catalyst 1000, on one of the ports of the switch I have a little server with proxmox on it for virtualization, I would like to access it from anywhere in the internet...
Hello,I guess you've already tried this but nevertheless, did you try to remove the QoS policy from the WAN interface to check if the problem persists?BRDiogo
Hello M02@rt37 That confirms my concern from lab testing: evpn multihoming core-tracking checks only the local routed interface state, not the real end-to-end reachability between ES peer loopbacks.So if the direct inter-ES path fails and the alterna...
