Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,Two Cisco routers are connected as follows:VoIP--> R1 -->ISDN--> R2 -->VoIPAppreciate any ideas or recommendations to get successful calls from R1 to R2?The Problem: When the call leaves R1 to R2 over the ISDN link in between i see the call ...
Dear All,I would like to issue a voice translation-rule that can insert the digit number 3 before/after certain digits and also remove the last 3 digits at the same time.# Details:------------I receive the following Dialed numbers on a voice port fo...
Dear All, i have a problem where suddenly the router failed and when i connected to its console port i logged the attached output. Also below is the last show version taken before the failure (1 week ago). I need help to resolve this problem, Thanks....
Dear All,i have a problem where suddenly the router failed and when i connected to its console port i logged the attached output. Also below is the last show version taken before the failure (1 week ago).I need help to resolve this problem,Thanks..--...
Hi all,i would like to be able to add any digit let's say 5 before the dialed number recevied by the POTs call leg and then remove that number (5) after matching it to the outbound call leg PSTN in my case i would like to strip that digit and forward...
Thanks, the way i want it can be done like this:rule 1 /^\(004925\)\(......\)...$/ /\13\2/ But you gave me the right way..Appreciate your support..Thanks.
thanks for the reply, and yes it was rebooted due to a bus error but that was one week ago and it came back to normal with no problems until today show the following errors:virtual address corresponds to main:text, cache word 0 Cache Data not Availab...
