Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any ideea if PGW supports B number modification in nailed mode, based on CPC and B number?Got a config which modifies B number regardless of the CPC configured...Thanks in advance
Hi,Someone has an answer if the PGW has the ability to get SIP INFO messages containing DTMF tones and able to inform the GWAY via MGCP to generate those signals? (DTMF relay from SIP world to SS7 MGCP controlled gway).Thanks in advance
I am having problems getting two PGW's, master and slave, into sync, to create a redundant MGC.The master operates correctly with all the gateways but I am not able to synchronize the master and the standby.I have applied all changes into XEfgParms.d...
Hello all,I am facing some very strange problems related to FAX calls on some AS5400HPX used with a PGW2200 nailed mode config. Basically some destinations are simply not working for the FAX calls or, in the best case, at a very high failure rate (1 ...
I am very interested to know if anyone has made an installation of a CIC platform in conjuction with CW2000 RWAN & LMS. If yes I would like to know the features that were obtained by using CIC (e.g. graphical display of the map, events correlation et...
Hi,Receiving the RAI means (Remote Alarm Indication) and basically hte remote is sending this signal when it has no signal from your side.You should check the TX path from your CISCO equipment.Good luck
And one more:pom.datasync=false on the master? slave? both?The docs says master=false and slave=true at the startup and then, when all OK -> both to true.
Hello there,If you have the PGW2200 software and the AS5400 YOU CAN make the connection between the SS7 network and H323.You should configure the PGW software into "nailed" configuration in which, it translates the SS7 protocol to ISDN.The ISDN is s...
Hello there,YES you can. The feature is known as "Busyout Monitor".Please check at:http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087b50.htmlYou can find gatekeeper enhancements for that feature at:http...
