Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,we have our new mobility Anchoring setup. When we try connecting the client, the end user does not get IP.below is the debug logs-(Cisco Controller) >debug client c6:c7:a6:b5:2e:df(Cisco Controller) >*emWeb: Jan 17 14:59:17.723: [PA]Debuggi...
Hello All,We have 2 WLC's. 5508- Anchor WLC (8.5.161.7)3504- Foreign WLC (8.10.185.0)I have created a mobility group and added the WLC's MAC respectively.The FW ports 16666, 16667, 97 are all open.The control path is UP but the Data path is DOWN. I t...
Hello All,In our current wireless setup, we already have an Anchor WLC (5508) which is mapped to the Foreign WLC (5508).I need to add a new Anchor WLC to the Foreign WLC. The Foreign WLC's are in HA pair. My question is, since the Foreign WLC's are i...
Hello All,I have a 5508 WLC running on 6.0.x version. I need to upgrade it to 8.x version. But there are only 2 types of file transfer available (FTP/TFTP). Due to some restrictions, I am not able to use FTP or TFTP at our office.Could someone please...
Hello All,I have setup a new WLC (Cisco-5508) and the existing IOS version in pretty old (6.0.196.0)Could anyone please confirm if I can directly upgrade it to 8.5.161.0 or is there any specific upgrade path that needs to be followed.
Hello @Mark Elsen the foreign WLC is 3504 model running on 8.10.185.0 version and the Anchor is 5508 running on 8.5.161.7The mobility profile gets created on the anchor. When I see the DHCP (Infoblox), it is offering the IP but then nothing happens.
