Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have a client that has a CME in a remote location that is integrated with CM as an H323 gateway. We implemented COR lists on the CME system as they were having some issues with people at that remote location making long distance calls that ...
We are designing a solution to do faxing over a SIP trunk however we have learned from the provider that their SIP switch does not support T.38. Would it be possible to terminate the SIP trunk from the provider on a Cisco gateway (2911) and form ano...
I have been trying to set up a PPTP VPN between a Droid phone and a Pix running 6.3.5 code. As far as I can tell the configuration is correct and I can open the pptp vpn fine from my laptop however the Droid refuses to connect. Here is the relevant...
I have found in one of our rather large deployments that when an outside caller calls a DID into the Auto Attendant in Unity Connection 2.1 that if they use the system transfer option to transfer to an analog phone on a VG224 that is busy that it wil...
A customer is having an issue with inbound call routing. They are using a publisher and subscriber version 6.1.2 of Callmanager with 2811 routers as the voice gateways. The Callmanagers sit at sites A and B and there is less than 20 ms round trip t...
Did you find a fix for this? I'm also running into the exact same issue with the same version of CUCM (11.0). I've tried every browser I can think of with no fix so I don't think it's a browser issue.
Hello,I'm having the same exact issue with one of our customers as well. I had actually applied the .rgf file for the activation a few months ago and this week I got a call from the customer saying that the webadmin page was showing Evaluation Expir...
Unfortunately directed call park will only use whatever source is set to be the default music on hold for the system. You can change what source is the default in the service parameters in the Callmanager service. The parameter to change is the "De...
Well I've found that if I upgrade the code to the newest version 15.1.3.T that the tunnels work fine on the 2811. I'm not sure what changed in the releases as I have still not changed the config at all but I have it working now on that version of co...
