About fossilev700

fossilev700 · 02-03-2011

UCCX 8.0.2.11002-3.What is the maximum amount of time that recorded calls are saved?Is there a way to increase the amount of time calls are saved?thanksChris

fossilev700 · 09-22-2010

I cannot initiate a video call with a 9951. The 9951 can display video if the remote side such as a CUPC soft phone initiates a video call but there is no soft key or programmable feature button to initiate a video call. I have loaded 9.0.3 sip-9951 ...

fossilev700 · 09-20-2010

I have a customer requirement to restrict the display of forwarded number. Here is an example of what I am trying to accomplish:User A calls User B (User B has his number forwarded to 305-555-3999 a personal cell number)User A sees on his caller id t...

fossilev700 · 07-26-2010

I am running System version: 7.0.2.23900-4. Calling Party Transformations are not taking effect on MGCP GW. The exact same config works if I change the GW type to H323.I am attempting to set the caller-id to 201-201-2000 but it is not taking.The PSTN...

fossilev700 · 08-21-2009

My gateway is requesting 128K even though the dial-peer is configured to utilize g729. I am trying to limit calls to 5 g729 calls and have allowed 80K of calls.

fossilev700 · 03-17-2011

Has this feature been added to CUPS 8. I do not see it listed in the release notes.thanks,Chris

fossilev700 · 10-08-2010

H323 gateways calculate bandwidth differently. Each stream is allocated bandwidth. For a 2-way video call call bandwidth is 2 X 768 = 1536 per call. Have you tried setting the call bandwidth at 3072?

fossilev700 · 10-08-2010

Did you get the issue resolved? What documentation did you use for the integration with UCM?thanks,Chris

fossilev700 · 09-22-2010

The issue was the firmware the phone some of the phones were on 9.0.1 and others 9.0.2 once we loaded 9.0.3 the issue resolved.

fossilev700 · 07-26-2010

Issue resolved by doing a no mgcp / mgcp on the gateway. I had rebooted the gateway but apparently mgcp must be reset when a change is made to the calling party transformations...its always something simple

Member Since	‎04-03-2006 04:18 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	35

User Statistics

User Activity

UCCX 8 Call recording

9951 video call

Restrict call forward display on internal calls

Calling Party Transformation and MGCP

Gatekeeper Rejecting Calls due to insufficient bandwidth

Re: Restrict IM and presence in CUPS / CUPC

Re: Tandberg Endpoint as H.323 Client in CUCM 7.1.5

Re: Tandberg Endpoint as H.323 Client in CUCM 7.1.5

Re: 9951 video call

Re: Calling Party Transformation and MGCP