Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ello everyone, I'm getting falpping between port Gi1/0/16 and Gi1/0/23. Here is my config on the those interface: s16-smc-mdf-3750#sh run int gi1/0/16Building configuration...Current configuration : 206 bytes!interface GigabitEthernet1/0/16descripti...
Hi all,We've recently implemented 802.1X authentication on our Cisco WLC 4400 Series, and we're experiencing intermittent connection drops on some computers—but not all. We've double-checked the WLC configuration and conducted a wireless site survey ...
Hello Everyone,We have Cisco Unified CM Administration that manages our phone system. I have a phone that is locked by UCA and I want to assignee manual IP address on it but there is a lock on the setting and doesn't let me to change anything. Befor...
Hello All, I have a question, I built the following DHCP pool and ACL on the Cisco core. When the ACL is on the computer doesn't able to get IP address from DHCP but when I turn off the ACL it works perfectly fine. So here is the question when comput...
Hello Jonatan, I didn’t check whether the MAC address is different, but they are experiencing Wi-Fi issues. Bouncing the interface resolves the problem, but after a few days the same issue occurs again.
Here is the version information:Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.0.98.0RTOS Version.................
