Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I have a query regarding the tail drop behavior when using WRED in conjunction with CBWFQ.What happens when traffic for any of the precedence queue exceed the max-threshold?Does the excess packets spill over to class-default or tail-drop re...
Hello,I've come across presentations on L2VPNs which suggest the below conversions are possible while using L2VPNs.FR to ATM InterworkingEthernet to FR/ATM InterworkingFR to PPP InterworkingAll documents mention how it can be achieved using ISC 3.1. ...
Hi i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered...
Hi i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered...
Hi i am working on a site with 2 cisco 7920 ip phones (firmwware 3.01) & 2 1230 aironet access points 12.3(8)JA , when i try to access the corporate directory from the phone it states that there is "no service " .
If I understand right, without the implementation of WRED for individual classes, during congestion the individual classes would compete for class-default bandwidth in the ratio of allocated bandwidth.Now, if WRED is configured per class and the no o...
There are two situations to consider - 1. During period of non-congestion2. During period of congestion.Let us assume there are 3 classes configured, classA (priority 4), classB (priority 3)and classC (priority 2) and each has been allocated 25% of t...
Deepak,PBR isn't advised as it could result in high CPU utilization. Each forwarding decision is made by the CPU bypassing other switching methods like CEF and fast switching configured on the router.You might want to look at alternatives other than ...
