Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys
I'm having a little trouble with NBAR and I'm hoping someone could be of help.
So I've just deployed SolarWinds and I'm trying to enable NBAR on Cisco C9404R switch for deep application visibility. Then have the NBAR data applied into Netf...
Hello all,
So I have a customer that wants to migrate from their on-premise UCM infrastructure to Webex calling. However, they have a concern regarding the cloud hosting platform of the webex calling. If for some reason, an internet disconnection eve...
I have a client who has a CUCM server running version 10.5. The publisher and subscribing have suddenly stopped synchronizing for some reason. According to the customer, this seemed to have happened soon after migrating the CUCM instance from the Cis...
My client wants to upgrade their CUCM 10.5 to version 14 or even 15. However they have a UCS M3 and M4 server existing, which are both end-of-life. Problem is the M3 server cannot or may not support VMware ESXi 7.0 which is the minimum ESXi version f...
Hello guys
So a quick update... as agreed, I removed the 'ip nbar protocol-discovery' command from the interface, leaving only the 'ip flow monitor NTAMonitor input' command on the interface, but it still gives the same error. I figured that as long ...
Thank you @Joseph W. Doherty
I'll give it a try tomorrow and let you know how it goes. Since it appears to be a limitation as @balaji.bandi and I may not be able to acheive what I am trying to, if it doesn't work I might just've to consider using a...
Wow!!! Thanks @balaji.bandi
I think that just might be the cause. How do you guys even find these online resources. I pretty much skimmed through the whole internet searching for an answer before coming here but never stumbled upon this lol.
So what...
Hello @balaji.bandi
Here is the configuration excerpt...
flow record NTARecord
match ipv4 source address
match ipv4 destination address
match ipv4 protocol
match transport source-port
match transport destination-port
match ipv4 tos
match interface i...
Hello Shankar
I'm having a little trouble with NBAR and I'm hoping you could be of help.
So I've just deployed SolarWinds and I'm trying to enable NBAR on Cisco C9404R switch for deep application visibility. Then have the NBAR data applied into Netfl...
