Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Recently my company purchase Nessus VA scanner and after the scan, it shows CUCM is supporting SSL Null Cipher Suites. Details as below:Name:Null-SHACipher ID Code: 0x00, 0x02Key exchange: RSAAuthentication: RSAEncryption: NoneMAC (Message Au...
Hi guys,I am trying to use ASA 5510 to create a site to site VPN. After follow configuration guide, I don't see it is trying to establish the connection.Configuration guide:https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-ge...
Hi Guys,I just got a ASA 5510 and have some problem during setup.Below is my sample diagram:PC(10.126.183.225) ----- ASA e0/0 (10.126.183.228/29) ---- ASA e0/1 (172.16.0.1/24) ---- PC(172.16.0.50)Both pc can ping to the gateway interface at ASA but t...
Hi All,
Recently we encounter some issue on reaching our server in the server farm.
What’s going on is that everything seems to be OK, but then out of nowhere, we will get communication failures between specific machines. It looks like it’s an ARP is...
Hi All,
I have a pair of Nexus 5596 running in vpc with old firmware( 5.1) and there are 8 fex connected to the N5K. Basically the N5K is only used for basic layer 2 function only (without FC).
We are planning to upgrade the N5K to the version...
Hi All, Thanks @Sheraz.Salim for the advise. After i include the nat rules, the tunnel able to establish. Also as mention by @Rob Ingram, the tunnel only up when there is traffic pass through. Regarding the aggressive mode, it was configure for te...
Hi Dennis, I have create a object group with icmp services and include in the acl. object-group service PINGservice-object ipservice-object icmpservice-object icmp echoservice-object icmp echo-replyservice-object icmp traceroute access-list WAN_acce...
Hi, Thanks for reply. I also read that during google search and i have configure the security level, access list and assign to the interface. interface Ethernet0/0description WAN_Interfacenameif WANsecurity-level 0ip address 129.126.183.228 255.255....
Thanks Nazimkha & MJ for the quick reply.
I'm looking at section "Upgrading a Dual-Homed FEX Acces Layer" in the 7.3(3)N1(1) relase note and having some question.
1. In the release note, it mention to pre-provision the FEX. Can i know what is the pur...
Hi mohammed,
I keep all the members unregistered and it is having a loop instead.
User called -> 1st recording -> Transfer to huntlist but no member registered -> 1st recording -> Transfer to huntlist but no member registered -> 1st recording ag...
