I'm trying to configure BGP over VPN L2L.
The logs show that the source interface for BGP is the Outside interface and not the Inside.
I was looking for a command like: neighbor NET update-source (inside). But as this command is only availabl...
Hi all, I'm trying to configure BGP through VPN in my Cisco ASA 5525-X (IOS 9.1).
Logs show me that the source interface for BGP is my outise IP Addr and not my Inisde interface.
I was trying to apply a command like this:
#neighbor (R1) update-sour...
Hi all guys.
I have a CUCME 8.6 and CUCE 8.6. I'm using an Auto Attendant with basic script (Thanks for calling XX, if your know the extensión number please enter it now).
I have phones with 3 (1XX) and 4 (7XXX) extensión length. Can I configure the ...
Hi all, I need to apply QoS to control the traffic, I have a group of routers that are using BGP as routing protocol.Is it possible to apply QoS LLQ if I'm using BGP?It would be great if you can share an example.Thanks a lotDavid.
Hi all, I have two CUPS 8.6 clusters (Cluster A and Cluster B), both are in different domain and the communication is through a VPN s2s.What is the best way to communicate jabber IM users between cluster A and Cluster B. Plase share your comments.Tha...
Hi MUonkers, I found this interesting post. I have the same problem, could you be more clear about the solution? What do you mean with install all intermediate certificates.
Please let me know.
Hi Rajan, thanks a lot for your answer.
Just a question, is it posible to configure something like: Extensión Length: <=4 ?
Thats because user culture, they want to enter 3 o 4 digits and the system do the trasfer.
Hi Joseph, I'll use a policer.Just something odd, when I apply that QoS to the WAN interface, I lost the connection with the remote host 10.3.10.20. There is something wrong in the QoS config?Thanks again.David
Hi Joshep, thanks a lot for your answer.I'm trying to use QoS features (LLQ) in a network that is using BGP.For testing purpose, I want to control the http traffic to 100 Kbps, but when I apply this configuration I see that the http traffic is higher...