Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We have 3 units of C240 M4SX with CNA VIC 1225 attached to Fabric Interconnect (FI).
I understand that in order for the FI to discover the UCS server it need to be connected to LOM or VIC.
In my case, when I connect to FI via VIC, the server is ...
Hi, I have received a feedback from user that their signal is bad. Took an Fluke Aircheck and discover this. Been wondering, what is causing this kind of problem? The signal will go away for some times and come back. The reading is in front of the AP...
Hi All,Can anyone explain to me why this is happening, is it the cable problem or something wrong the switch, this only happen when we ping our Cisco Callmanager. Why is the ping is like dropping every 6th packet. This is our local network and we are...
Hi All,We have 1 CUCM cluster with 2 Servers 1 PUB and 1 SUB at main site. We have another remote location site that is runnning a few units of phone which is connected using leased line. We have just upgraded our callmanager version to 8.5.1.11900-2...
Hi Guys,I have been trying to install user changeable password (UCP) facilities with new ACS 5 but until now it is a dead end .. I have gone through UCP installation guide from Cisco and getting stuck on the ACS preparation guide. It seems like I can...
Hi Walter,
Yup, currently it is connected to FI and the card is in riser 1 slot 1. Done reacknowledge server as well but still the status is inaccessible.
See attached screen capture
The screenshot is from UCS Manager 3.1(1e)
VIC is connected to UCS FI in cluster mode, 1 connection to fabric A and 1 connection to fabric B.
Currently UCS is connected to FI via onboard LOM since connecting it from VIC is not discoverable.
