Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We are using Cisco Nexus 5596UP on DC.we want to use 1g-mm gbic for fiber connection, but do not link upsh int 1/29 trans det transceiver is present type is 1000base-SX name is CISCO-FINISAR part number is FTRJ-8519-7D-CSC re...
Hi All,We have two Cisco Nexus 5596UP switch.We upgraded n5000-uk9-kickstart.5.0.3.N2.1.bin (Fan speed %40) to n5000-uk9-kickstart.5.1.3.N2.1a.bin (Fan Speed %60)but 20% increased speed of the fans. What could be problem?Software BIOS: version ...
Hi,Fex does not work with following configuration. Can Cause?Regards,fex 104 pinning max-links 1 description "FEX0104"interface port-channel104 switchport mode fex-fabric vpc 104 fex associate 104interface Ethernet1/41 switchport mode fex-fabri...
Hello,We are using ATA 186 on branch officies for Analog Voice Communication with Call Manager.When you lose the main line branch, the device works on srst mode. However, the situation when the main line up again, do not register to Call Manager and ...
Hi,I am using The Cisco 2811 Routers for Branch Officies and that use "ip sla" and EEM configuration for monitoring.I find OID match Name and Stirng list.is The following configuration true?What can I use digit instead of rttMonLatestJitterOperOWMaxS...
i've tried on N7K. It's working on N7K with same gbic and fiber link.But, it's not working on N5K.I will open a case for this problem..Regards,Sent from Cisco Technical Support iPhone App
I've tried eight different gbic SFP is working on N7K, but on the core switch, the customer do not want to link to.However, the end connected to customer switch. I will check again tomorrow customer side.In addition, the test will N7K connectivity on...
Hi,We are using 1000Base-SX SFP in N7K with release 6.0.2,But, we can't use 1000Base-SX in 5596UP with release 5.0(3)N2(2b)1000Base-SX writes are supported on the web page you suggested. However, in accordance with the following configuration does no...
