Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey All,I've installed a second Cisco ACS server for redundancy on our WPA2/AES/802.1X wlan and I was wondering how this will affect user connections. I have 2 ACS's with 2 different certificates and they are setup as radius 1 and 2 under this specif...
Hey All,Scenario:We have a switch stack of 3750's and the desktop people are trying to ghost/image. The stack is an access layer stack with no layer 3 and igmp snooping is enabled by default. All machines in this scenario are on 1 vlan and we'll ...
Hi,We are looking to deploy either appletv or airserver to support the demand for mirroring ipads/android/laptops to projectors in our classrooms. I'd like to leverage the existing hardwires computer/vpu and install airserver and allow the pc (ethern...
Hey All,We've currently deployed the 5508 wlc(7.0.116.0) with ssid's using interface groups. We have roughly 200 access points and a mixture of 3500, 1120, 1121 and 1230 access points running a a/g/n (where applicable) environment. We are working tow...
Hey All,I have a strange issue in regards to our fwsm and an Oracle RAC deployment. See scenario below:FWSM in transparent mode running 3.2(10) code.Context name = backupinside interface = vlan 10 (security level 100) ****same addressing on both side...
Stephen,This is exactly what we have seen here and just added PIM command to the upstream layer 3 interface. Thanks for verifiying what we were seeing.Craig
Rodrigo,I've seen the same issue here but it might happen on 1 desktop and then never happen again on that same desktop doing the exact same steps. I'll get our server people to have a quick look on their side while I wireshark yet again.Thanks for ...
