Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a Communication Manager Express application on Cisco 2951. The PSTN connection is handled through a T1 line to a WIC card VWIC2-1MFT-T1/E1 installed on the 2951 router. We have 2 routers active (router 1) and standby (router 2). The incomin...
Hi,We are buying CIVS-MSP-4RU server / 24 TB with Cisco Video Surveillance Manager softwares. We are also employing 28 IP cameras (non-Cisco). Do we need to get seperate software licenses for these cameras? or the Cisco Video Surveillance Media Serve...
Hello, We are having trouble determining which OID & MIB would represent a LinkDown condition on a port of a Cisco 3560 switch. There seems plenty of references to OID: 1.3.6.1.2.1.11.0.2 / Cisco-General-Traps however after a MIB walk this OID does...
I have a Communcation Manager Express running on 2 routers (cisco 2951): one active and another standby for redundancy.I contacted AT&T to get the T1 line for the WIC card and they get back to me with a form to be filled. I'm having some hard time to...
Manish,I don't have the debugs now, but I will post them as soon as I get on site. The interruption is only occurring with the outgoing calls to the PSTN. All the internal calls between IP phones on the same network are working fine. When the problem...
Thank you again for your reply.Well we are getting the traps from the switch to the NMS server, but we are having hard time to determine the OID & MIB that represent a LinkDown condition.Can you refere me to the right OID for a linkdown on this switc...
I have no access to the cisco switch now, but I can share this with you:Switch #1: WS-3560G-48TSSwitch #2: WS-3560G-24TSVersion on both switches is 12.2
