About tkriegbaum

tkriegbaum · 04-27-2020

Hey, for some reason after erasing the running-config on the XR-VM via "commit replace" the System only boots to the sysadmin Login prompt on the Serial console. I can Login but I don't know how to switch to the XR-console.Typing "Exit" gets me to th...

tkriegbaum · 08-16-2018

Hi, is there any minimum distance required when using cisco's SFP-10G-LR (smf) to prevent any damage on the receiving SFP+ module? According to what I found in the web there is no minimum distance for IEEE 802.3ae! It can be used even for two meter...

tkriegbaum · 07-13-2018

Hi there, the Cisco switches nexus-3524-x and -3548-x platforms are built on the identical hardware. Both series have physical 48 ports. My question is: On a Nexus 3524-x which 24 out of the 48 ports can I use by default? Is it port 1 - 24? Or th...

tkriegbaum · 03-10-2005

Our customer used to have a cisco voice gateway 2651XM talking H323 to ccm. We had to change the bearer capability for outgoing calls from speech to 3.1Khz audio. This was achieved by:router(config-if)isdn outgoing-voice info-transfer-capability 3.1k...

tkriegbaum · 06-08-2022

Thanks a lot for this very detailed information! It is very valuable and helps a lot to clarify my pki related questions. I am going to open a tac case to get additional answers including to the original post question and will provide an update soon.

tkriegbaum · 06-08-2022

Hi dwright6123, I am researching the exact same questions you came up with. I cannot find any guide how to make reasonable decisions to design all the CA related questions in a sda environment. Did you made any progress recently? Thanks

tkriegbaum · 04-27-2020

hm, the question would be how to send CTRL-o via terminal Server. We are using a cisco ISR 4321 router acting as a terminal Server. Is that possible?

tkriegbaum · 07-16-2018

Thanks Christopher, good post you found! I am positive that it works like this guy mentioned it. -Thomas

Member Since	‎07-10-2004 01:56 AM
Date Last Visited	‎06-15-2022 12:44 PM
Posts	10

User Statistics

User Activity

ASR9901 serial console only shows sysadmin prompt. How can I access the XR-VM?

SFP-10G-LR minimum distance

Which 24 ports are enabled on the Nexus 3524-X Switch

How to change the bearer capability on MGCP gateways

Re: DNAC PKI Certificate Management (Subordinate CA)

Re: DNAC PKI Certificate Management (Subordinate CA)

Re: ASR9901 serial console only shows sysadmin prompt. How can I access the XR-VM?

Re: Which 24 ports are enabled on the Nexus 3524-X Switch