Hello Everyone, I would like to know the solution for wireless outdoor point to multipoint backhaul connectivity between different buildings at my client location. The scenario is like there will be a central tower at the data center and other buildings almost 0.5-1.5 Kilometers. And inside the buildings, indoor access points will be connected. The main concern is for outdoor backhaul connectivity between the data center and building location, please help me with devices we can use for outdoor backhaul link.  Thank You ! Regards, Aditya ... View more

Hi, We want to configure RTR in our network ,having a Cisco 6506 core Switch & 50 Cisco 2960 Switches. As per the ios on the 6506 the rtr command is supported not the ip sla , so we want to configure it on it. The RTR configuration on the Source device (Cisco 6506 Sw) can be done through the below commands : 1)          enable 2)          configure terminal 3)           rtr   <Entry number> 4)          type echo protocol ipIcmpEcho <Hostname or A.B.C.D  IP address or hostname>  source-ipaddr < IP address > 5)          frequency seconds 6)          exit 7)          rtr schedule entry-number [life {forever | seconds}] [start-time {hh:mm[:ss] [month day | day month] | pending | now | afterhh:mm:ss] [ageout seconds] [recurring] 8)          exit RTR configuration on the target devices (Cisco 2950  SW )will be : 1)          enable 2)          configure terminal 3)          rtr responder 4)          exit The query here is that : 1) Is this configuration will work ? 2) And for every Cisco 2950 Switch , i have to create  seprate rtr entry on Cisco 6506 Sw for example for 50 target device i have to create 50 entries on source device 6506 ? Thanks in advance.... Aditya ... View more