HiI wonder does anyone know this? Can anybody tell me there is show command available that will display all the commands that are enabled by default.....i.e. a show run will show what commands you have enabled but what about the commands that are al...
Hi,I need some help on snmp views. In part of our network, we have a series of remote routers connectedback to a branch router. No routing protocol is run over the WAN between remote router and Branch router.The Ip subnet of the lan@ the remote rout...
HiHas anybody ever tried resetting a vty or the enable secret password via SNMP? I've read that there is something you can do with pullling back the running-config and comparing it to startup-config....via snmp assuming you know the RW Community-str...
HiQuick question - I am trying to get EOT working with EEM but current IOS I have doesn't seem to support the stub-object. I've upgraded my IOS to c2800nm-entservicesk9-mz.124-25c.bin so it should come with Embedded Event Manager 2.2. However when I ...
HiCan someone confirm that the source ip of an ip packet when communicating with a central dhcp server will be the source ip of workstation? IP helper-addressing configured on lRouter Lan interface so incoming dhcp request will be forwarded on as a ...
Hiya Yes this does indeed work but I only want certain subnets to use tacacs server 1 and other subnets to use tacacs server 2 - I can't see a way of splitting this down on the IOS.RegardsMary
Ok, that is helpful. What we are receiving is the trap below. OspfTXRetransmits though -
should that be something I worry about as they are occuring very often(or rather the trap is logged often)?
SNMP config on the Metro Switch is as follows:
snmp...
