Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi to all,
I have two switches Catalyst (one C2960S and one C2960), I have configured the SNMP for monitoring purposes. The C2960 works fine and the other unit doesn't work.....
The configuration is the same and the switches are in the same subnet, b...
Hi to all,
I have one user with Read-Only privileges (level 5). When I try to access to the device via ASDM, the launcher opened the dashboard but when the ASDM is parsing the configuration, the application ask me the credentials one more time. If I ...
Hi to all,
I have got to upgrade our ACS server from 5.6 version to 5.8 version.... I have read in cisco documentation and for to make this upgrade, I've got to install the last patch for 5.6 version.... Somebody knows how much time is used for to co...
Hi to all,
We have an ASA 5550 Firewall, it has configured some site-to-site VPN which are working properly.....
Now, we need configure a new one, but the remote IP range is the same than other local IP range in other VPN. Is there anyway for to conf...
Hi to all,
I have a customer who has an ASA-5550 (ASA-IOS 9.1.6). They have some servers in a subnet outside of their office. When they connect to these servers, they need that the tcp connection time-out will be about 4 hours.I have got configured t...
Hi,I have the same issue... In the morning, the clients are able to associate to the SSID and they get the splash screen for authentication. The clients can authenticate and can browse internet without any issue. If the clients disconnects their wifi...
Hi Richard,
I think there isn't a connectivity issue because I can manage the two devices via telnet/ssh without any problem... I can ping the two devices and I can manage all the functions... I've checked all the communities strings and are configur...
Hi Jason,
the 2960S has the IOS version: c2960s-universalk9-mz.122-53.SE2.bin. And the 2960 has the IOS version: c2960-lanbase-mz.122-35.SE5.bin.
Thanks.
Regards.
David.
Hi Alejandra,
I have tested this command but it doesn't solve my problem... The ASA follow asking me the credentials and, if I use the level 5 user, the ASA doesn't let me see the device configuration.....
Can you help me???
Thanks in advance.
Regard...
