Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a new /28 subnet from our ISP Charter Spectrum...
Internet Connection Information from Charter:
Network Block: xxx.xxx.xxx.64/28
Gateway: xxx.xxx.xxx.65
Subnet Mask: 255.255.255.240
First Useable IP: xxx.xxx.xxx.66
Last Useable IP: xxx.x...
I am having difficulties getting our WAAS devices to authenticate and login via RADIUS. Running NPS on Windows Server 2012. Confirmed that my WAAS appliance can ping the RADIUS server IP address. Using the Service-Type Attribute of Administrative ...
Has anyone ever built a script in UCCX to handle a post call customer satisfaction survey where the user would hear a question and then press 1 for yes, 2 for no, or weigh the service on a scale from 1 - 5?
I am sure something like this is very feas...
I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 Mirrored. I went through and completed installation of VMware ESXi 5.0 on this server. When the installation completed and the ...
Hello,I am trying to copy and transfer of list of speed dials from one attendarnt console user to another attendant console user. I am not sure if this is possible or not.I am using CallManager 7.0.2 and Cisco Unified Enterprise Attendant 3.1.1.8.Any...
Yeah, that is what I kind of figured. I went ahead and moved the Charter circuit directly to the ASA. With this setup, I now can fully use that /28 subnet on the ASA. I then routed the Charter connection from the ASA to the ASR.
Thanks for the help Michael!
Using WinSCP and your directions worked like a charm. I was able to install jeos-20.1.2-0-lnx64.zip and then upgrade to sp-30.0.0-0-0-lnx64. I have been struggling with this a couple of a weeks now and glad to get it u...
Once logged into root on CSPC, how do you copy the file from an ftp server to /opt. The directions from Cisco states...
4. Create or choose a temporary directory to store the image
5. Copy the downloaded component to /opt.
6. Apply JeOS using the b...
Marc,
Did you ever resolve with being able to SSH to your VG204XM? I have one setup and working fine via telnet, but I want to disable telnet access and enable SSH for security reasons. The standard CLI command of "transport input ssh" is not being...
Thanks for the response. That was the issue. RADIUS does not work with WAAS version 6.2.1. I have one WAAS still on version 5.5.7, configured that for RADIUS, and had no trouble logging in with my RADIUS credentials.
Do you know when version 6.2.3...
