About mizoran78

mizoran78 · 09-23-2011

HiI have a authentication chalenge on my ASA.I have site to site IPSec VPN between to offices of one company. Everybody can communicate to each other, everything is open between those two subnets. In addition on local ASA remote users use remote-acce...

mizoran78 · 09-21-2011

HiI have access to my enterprise network through Cisco VPN (software) client and it goes through remote-access ipsec vpn setup on an ASA 5510. Everything works fine.But now users that connect to the enterprise network have in addition need to access ...

mizoran78 · 12-02-2010

Hello,I have a 4506-E switch chassis but I am not sure which Supervisor Engine it has (I cannot get that info). I only saw the picture of switch and it has 2 10Gig interfaces on its Sup.My question is: What is minimum Sup model required to support a ...

mizoran78 · 06-21-2009

Hi all,Is there any incompatibility in CDR format between versions CCM 5.x and CCM 7.x?I have billing software developed for the CCM 5.1, and it's quite important to me to know would it be necessary to hire a programmer to change/modify my software f...

mizoran78 · 04-03-2009

Hi all,My problem is the following. I have 2811 router with 256MB of RAM and 64MB of flash memory, loaded with IOS 12.4(3g). It has CME 3.3 up and running and generally it works OK.But my problem began when I wanted to upgrade IOS with newer IOS due ...

mizoran78 · 09-23-2011

I would not blame ADSL anyway, but I am relly getting empty of ideas Hopefully some Cisco guru will see this and help you.Have a nice weekend!Z

mizoran78 · 09-23-2011

Solved!

mizoran78 · 09-23-2011

But have you tried ssh 10.74.97.0 255.255.255.0 insidehttp 10.74.97.72 255.25.255.255 insideand Management-access insideZ

mizoran78 · 09-23-2011

Hm. Have you tried to specify allowed ssh access from inside?ssh 10.74.97.0 255.255.255.0 insideZ

mizoran78 · 09-23-2011

Btw, outside is just the name of the interface. It could be different in your setup. You shoud put the name you have used to name your outside interface. I hope now it is clear enough.Z

Member Since	‎07-08-2007 11:10 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	43
Total Helpful Votes Received	15

User Statistics

User Activity

I want ASA to use internal interface as a source IP in communication towards outside

is it possible to this with remote-access vpn?

WS-X4606-X2-E what is minimum Sup engine on 4506-E chassis?

Is there any incompatibility in CDR format between versions CCM 5 and CCM 7

loading IOS greater than 33MBs fails

SSH connection from outside interface

I want ASA to use internal interface as a source IP in communica

Re: SSH connection from outside interface

SSH connection from outside interface

SSH connection from outside interface