About GUNGIT2012

GUNGIT2012 · 04-07-2015

Hi,I have a new Cisco IP Phone 8961 with one color key expansion, and the main phone is working, but the expansion is not working, there is nothing on the LED display, and the indicators of the button are all off. Our call manager is CUCM10.0, Expans...

GUNGIT2012 · 01-22-2015

Hi,I have a question about the license of CUCM and CUC as below:We have 2 CUCM 10.0 (1 Pub+1 Sub) and 1 CUC, CUCM and CUC licenses have been added to PLM of Pub, it is working normally when I open Cisco Prime License Manager of Pub, but Sub and CUC a...

GUNGIT2012 · 01-18-2015

Hi All, Here is a question about the H.323 Gateway+SRST.The following is the configuration of Cisco 2911:!call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address 10.161.241.123 port 2000 max-ephones 50 max-dn 10...

GUNGIT2012 · 01-14-2015

Hi, We have CUCM10.0 and Cisco 2911 with H.323 gateway. I have checked the dsp group on 2911, their are all up and available.Now the problem is the internal conference and external conference. When we using the conference button with internal extensi...

GUNGIT2012 · 01-07-2015

Hi, We have a CUCM Call Manager 10.0 with a Cisco 2811 H.323 gateway.Now everything is ok when the DN with none parition. DN can make outgoing calls and incoming calls.When this DN with a parition, this DN can make outgoing calls, but when the user c...

GUNGIT2012 · 01-19-2015

Hi Terry, Any else ideas can help on this case? Thanks

GUNGIT2012 · 01-19-2015

Hi, Tried again, still failed. GW#conf tEnter configuration commands, one per line. End with CNTL/Z.GW(config)#dspfarm profilGW(config)#dspfarm profile 1 conGW(config)#dspfarm profile 1 conferenceGW(config-dspfarm-profile)#shutDisabling profile will...

GUNGIT2012 · 01-19-2015

Hi Terry, Today I tried to have a test about the conference bridge for external number again, but after added the second external number, all calls ended.I am sure that there is nothing changed after we tested successfully last time.CUCM:1) conferenc...

GUNGIT2012 · 01-18-2015

Hi Terry,10.161.241.123 is the ip address of gateway router, and the SRST reference IP add defined in CUCM is the same.I have checked from phone setting and browsing to the ip address, but I didn't see any SRST option. our phone type is Cisco 7841 Th...

GUNGIT2012 · 01-15-2015

Hi Terry, You're right, just checked what you mentioned, we missed the conference bridge on MRG, now it is working, thanks for your kindly help again.

Member Since	‎01-07-2015 12:49 AM
Date Last Visited	‎02-09-2023 11:38 AM
Posts	18

User Statistics

User Activity

IP Phone 8961 Color Key Expansion is not working

CUCM 10.0 Pub+Sub License

Cisco 2911 H.323 Gateway + SRST

Ad hoc and DSP

CUCM Call Manager and Partition

Hi Terry, Any else ideas can

Hi, Tried again, still failed

Hi Terry, Today I tried to

Hi Terry,10.161.241.123 is

Hi Terry, You're right, just