About Cristian Rimondi

Cristian Rimondi · 02-13-2014

Hi,someone can help me to upgrade IOS on ME-C6524GT-8S ??

Cristian Rimondi · 02-20-2013

Hi all,on a WS-C4507R-E there is this configurations:Cat4507#sh verCisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)Image text-base: 0x10000000, data-base: 0x12C41C68ROM: 12.2(44r)...

Cristian Rimondi · 05-02-2012

hi,i need to recover a router Cisco 2801. I lost the password and the "no service password-recovery" is configured.I have done many attempts with the procedure in this link :http://www.cisco.com/en/US/partner/docs/ios/12_3/12_3y/12_3ya8/gtnsvpwd.htm...

Cristian Rimondi · 09-23-2011

Hi,I installed a new WS-C6509-E and shortly after was in Software-forced reload.The message is:%Software-forced reload15:19:28 UTC Wed Sep 21 2011: Breakpoint exception, CPU signal 23, PC = 0x425CEFF8--------------------------------------------------...

Cristian Rimondi · 06-10-2011

Can you help me to make the migration from two AIR-WLC4402-50 to two AIR-CT5508-100 ?How do I migrate all LAP to AIR-CT5508-100? and, can be done without interruption of services ?What are the steps to follow?There is documentation on this?Thanks in...

Cristian Rimondi · 02-20-2013

??look :Cat4507#sh redundancyRedundant System Information :------------------------------ Available system uptime = 28 weeks, 4 days, 17 hours, 5 minutesSwitchovers system experienced = 3 Standby failures = 76 Last switchove...

Cristian Rimondi · 05-03-2012

Thanks to all, but your information is incorrect.Manuel, I don't care to save the configuration on the router, I want to reuse the router and do I have to be able to delete the passord. Your instructions are incorrect because they are not for 2800 se...

Cristian Rimondi · 05-02-2012

I've tested your solution, but it does not work.In the link that you wrote, there are the instruction for a Cisco2600.

Cristian Rimondi · 09-28-2011

Hi all,The problem was solved.Maybe it was the ground.greetingsThe problem was solved.Maybe it was the ground.greetings.

Cristian Rimondi · 09-28-2011

Hi,To know what kind of lasers, you should read the name on the hardware of SFP.For example : GLC-SX-MM is 1000 Mbps for Short distance (multimode fiber); GLC-LX is 1000 Mbps for Long distance (multimode fiber or single mode fiber).Look at this link...

Member Since	‎04-22-2005 07:58 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	18
Total Helpful Votes Received	5

User Statistics

User Activity

ME-C6524GT-8S ios upgrade

Problem on a supervisor WS-X45-SUP6L-E

Recovery password Cisco2801 with "no service password-recovery"

problem WS-C6509-E with sup720-3BXL - Software-forced reload

Migrating a WLC4400 to CT5500

Problem on a supervisor WS-X45-SUP6L-E

Recovery password Cisco2801 with "no service password-recovery"

Recovery password Cisco2801 with "no service password-recovery"

problem WS-C6509-E with sup720-3BXL - Software-forced reload

Re: How to test C3750-IPBASE-M switch Fiber port working or not