When connected directly to network (office), IPC works fine with no problems however when using AnyConnect from home office, unable to get audio to work.Firewall issue? looking for suggestions...
I've started to setup a home IPT lab to try learn a little about Unified Communications a little more. I'm having problems with getting my 3550 switch configured properly to get IP phones to register properly. I have a dedicated machine that has ESX...
It not a firewall issue, tried adding AnyConnect to firewall exceptions in XP with no luck.AnyConnect version 3.0.3050IP Communicator version 7.0.4.0O/S is Windows XPIPC works fine with other VPN clients, also works when directly connected to network...
Yes, ping successful from CUCMServers defined with hostnames.Status message on phone says DNS timeout. Do I need to change the servers to ip addresses?
still no luck.to avoid confusion, here are portions of config again.mls qosip subnet-zeroip routingno ip domain-lookupip dhcp excluded-address 192.168.3.1 192.168.3.20ip dhcp excluded-address 192.168.3.200 192.168.3.254!ip dhcp pool phone network 1...
I did factory reset and same thing. still saying configuring ip.I just tried setting a static ip on it now that we've changed everything to vlan 1, waiting to see what happens.
