Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have just posted this under another discussion but after further consideration believe it best to start a separate discussion. We are a partner that has just sold our first BE3000 for a 15 user office and are realizing there are some curren...
Hopefully this is a very obvious task and I am just not seeing it, but we are unable to locate where to configure a DID for a user. The data sheets state that this system supports this feature and we have a PRI with 30 DIDs that we are trying to con...
Hi all,I am trying to find which ISR models and IOS versions support the Anyconnect Secure Mobility client. I have the Anyconnect 2.3 client working on a 3945 router and am hoping to move them to the newer client.Any help is appreciated.Bria
Hi all,I've been getting "%MAC_MOVE-SP-4-NOTIF: Host xx.xx.xx.xx.xx in vlan 123 is flapping between port Gi1/18 and port Po1" entries on my core switches. The topology looks like this:Interface Po1 connects my two 6500 core switches, we have HSRP run...
Hi all,I'm trying to understand the various IM and video/meeting applications available to a customer without a UC deployment. Is it limited to Jabber and Webex Connect? If so, what are the major differences and the limitations of these? Thanks.
I'm confused by the network interface requirements. Is Cisco asking that each VM host in the cluster have 2 dedicated physical ports for this VM? Can you elaborate on this?
Hello Navin-Thank you for your reply. I understand that this is a basic UC system, but I think even saying it has basic functionality is misleading. I am currently trying to get one working for a small office and quite frankly, I never would have s...
What is the current roadmap status? We just sold one of these systems for a very small company with simple needs and are running into hunt group and shared line issues. It has been 8 months since the last software update. Please advise.
The BE3000 has an internal gateway. Regardless, we resolved this issue. The solution was to configure translation rules for each DID.I have to say, however that there are some rediculous caveats on DIDs with this system. We opened a TAC case and f...
Here’s what I have:(Cisco Controller) >show mobility ?summary Displays a summary of the Mobility manager.anchor Displays the Mobility WLAN anchor list.statistics Displays statistics for the Mobility manager.(Cisco Controller) >show...
