Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I have two C6509-E with Sup2T. I converted each one to VSS mode separately.I want to know the impact or what will be happen if i connected them through the VSL.
The configuration file " Interface numbering" in the both device is not synchroni...
Hi allI came in today to find that most of the players on DMM are status down.DMM version: 5.2.2DMPs version: 5.2.3after checking I notice that the certificate installed in all DMP are expired.Can you show me how can I fix the issue?Thanks.
Hi all,I use EAP-FAST in my network and I have some questions about it.1) is there any vulnerability detected with EAP-FAST?2) Can I restrict the establishment two or more simultaneous sessions using the same account and same PAC? how3) Can I use EAP...
HiI have two C2851 + nme-wae-502-K9 and it the first time that I work with WAAS.Can you help me and show me how to setting up?1) How to connect the WAE and intercept traffic from the LAN <==> WAN?2) I need the CM to optimise the traffic or I can do w...
Hi all,I deployed wireless mesh with 3 RAP and 1 MAP (AIR-LAP1522AG-E-K9 with 4 antenna) + WLC 2504.The AIR-ANT2480V-N are instelled on pole from a height of 17-15 m.I noticed that I can't get a good signal (front of antenna between 40m to 60m I got ...
Hello,
The both switchs had already converted to vss but are not synchronized each one had its new interface numbering switch 1 (gig 1/1/1) swich 2 (2/1/1) therefore the switch 1 is in production am afraid that when I connect the switch 2 its config ...
Hello,
thanks for your response,
Both switch are configured as vss but they never synchronize the configuration so one of them is in production I want to know if I activate the VSL which one will be reload and which config will be override,
Thanks.
Thanks for your replyBut wich patch I will do : the 5.2.2 or 5.2.3 patchorI need to do upgrade to last version of DMM and DUMP if yes how can I do it for all DMP automatically?Best Regards.
