HI,TEAM: ASA 5500-x Cluster and HA desgin in Campus with 4507 VSS. MY Desgin like this: 1.area 0: have two 4507 vss 2.area 1: have two isp,two asa 5515 use HA mode.,use for pc to internet 3.area 2: have two isp,two asa 5515 use cluster mode.,use for partner to connect 4.area 3: two asa 5515 use HA mode,connect two 2811,use for connecter bank 5.area 4: two asa 5515 and ips license use cluster mode.,use for inside server 6.area 5: dmz area,use for some web server.   config point  like this 1.area 0: VSS if connect HA ASA,made switch two interface in one vlan ,config ip add on int vlan. if connect cluster ASA,made switch two interface in one portchanne ,config ip add on int portchanne.   2.area 1 : asa ha and two isp in ha mode, default route 0.0.0.0 telecom (ISP 1)。other  Unicom network ,router ISP 2 3.area 5: some web server  maping isp 1,some mapping isp2 4.area 3: asa HA and 2811 hsrp 2811 have one hwic-esw card for Second Layer connect,use hsrp connect two ASA. and,use ip route to connct bank . 5.area 4 :  IPS config whice mode i use?(not in line,may be promiscuous mode) if i want Inspection DMZ area 5, asa 5515-ips can do it ? if not,may be IPS4300 can do this ?   hi,team; if my degin is ok? and my config point is ok? thank you.           ... View more

hi,team: my cisco 4503 ip base reboot at every once in a while. starting  up 2-5 minute,auto reboot; or starting up 10-30 minute auto reboot. but at my equipment  there have no flow or line. my tech file: ... View more

hi ,all cisco 6509 reload,but can not auto boot ,must user use boot config. if my 6509 reload or  interruption of power supply,  can not auto boot image. income rommin> we must use boot  confige. why? ZS-WLZX-CISCO6509-1#show version Cisco Internetwork Operating System Software IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2004 by cisco Systems, Inc. Compiled Sat 10-Apr-04 11:40 by hqluong Image text-base: 0x40008F90, data-base: 0x41850000 ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1) BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) ZS-WLZX-CISCO6509-1 uptime is 15 weeks, 1 day, 1 hour, 50 minutes Time since ZS-WLZX-CISCO6509-1 switched to active is 15 weeks, 1 day, 1 hour, 49 minutes System returned to ROM by power-on (SP by power-on) System restarted at 14:48:30 BeiJing Tue Sep 3 2013 System image file is "sup-bootflash:c6sup22-psv-mz.121-20.E3.bin" ZS-WLZX-CISCO6509-1#show module Mod Ports Card Type                              Model              Serial No. --- ----- -------------------------------------- ------------------ -----------   1    2  Catalyst 6000 supervisor 2 (Active)    WS-X6K-SUP2-2GE      3   16  Pure SFM-mode 16 port 1000mb GBIC      WS-X6816-GBIC       5    0  Switching Fabric Module-128 (Active)   WS-C6500-SFM       ZS-WLZX-CISCO6509-1# show bootvar BOOT variable = sup-bootflash:c6sup22-psv-mz.121-20.E3.bin,1 CONFIG_FILE variable = BOOTLDR variable = Configuration register is 0x2102 Standby is not up. ZS-WLZX-CISCO6509-1#show run | in boot boot system flash sup-bootflash:c6sup22-psv-mz.121-20.E3.bin ip nbar pdlm sup-bootflash:bittorrent.pdlm ... View more