About Pradeep H A

Pradeep H A · 04-06-2017

Hello experts,I need you help to understand the MAC table output of a cisco WS-C6509-E switch. I was trying to trace the L2 path from this switch to the IP 10.64.130.20 which is the next L3 hopI pinged the IP from my 6509 switch & checked the ARP. Fr...

Pradeep H A · 10-19-2016

Hi all, I have AIR-CT5508-500-K9 WLC running version 8.0.121.0 that has crashed & rebooted. Last reset reason shows as watchdog. The coredump generation feature has been disabled. So I dont have any logs to troubleshoot the issue. My questions are: 1...

Pradeep H A · 06-19-2016

Hello all, I have used the below EEM script on a Cisco 3750G running IOS Version 15.0(2)SE to capture the logs when CPU spikes that help in the investigation of the reason for intermittent CPU spikes. But I saw that the logs are not being captured in...

Pradeep H A · 01-30-2014

Hi Experts,I am trying to investigate why this Cisco WAVE-694-K9 box is showing the traffic between 10.33.177.0/24 and 10.36.67.0/24 as passthrough. Please suggest me the further troubleshooting steps as this traffic was expected to be optimized but ...

Pradeep H A · 12-29-2013

I just want to know generally when are traceback logs generated on a router? does it mean the router would crash soon or IOS has hit a bug?

Pradeep H A · 04-27-2017

Hi guys, >> I cleared that mac table entry and also cleared the ARP for that host IP address but it came up again as static. 6509#clear mac address-table ? dynamic dynamic entry type 6509#clear mac address-table dynamic int Fa3/27MAC entries cleare...

Pradeep H A · 04-10-2017

Hi tried clearing the entry but the result remains same 6509#clear mac address-table ? dynamic dynamic entry type 6509#clear mac address-table dynamic int Fa3/27 vlan 140MAC entries cleared. 6509#sh mac address-table | i 9caf.ca85.78bc 140 9caf...

Pradeep H A · 07-06-2016

hi supportlan, Hurrah! Finally the issue is resolved. I had to increase the maxrun time to 3600 secs to get all the command outputs saved into the flash. I wonder what makes the command outputs take so long to get recorded into flash! Even when maxr...

Pradeep H A · 07-02-2016

Hi supportlan, I have uploaded the debug logs. Please have a look & advise. I have highlighted a line that shows the EEM script exited because a time out occured. I am not sure where in our configuration we have specified a time limit of 20 secs! Th...

Pradeep H A · 07-01-2016

Hi supportlan, I tried adding privilege 15 but looks like the option is not recognized C3750(config)#event manager session cli username "user" privilege ?% Unrecognized command Also I learned the Action labelling in my script was wrong the next state...

Member Since	‎05-02-2012 05:08 AM
Date Last Visited	‎02-05-2020 12:25 AM
Posts	70
Total Helpful Votes Received	5

User Statistics

User Activity

Show MAC table output query Cisco 6509

Cisco Wireless controller WLC 5508 crash file

EEM Scripts not capturing logs to flash

WAAS Pass through traffic

What are traceback logs?

Hi guys,

Hi tried clearing the entry

hi supportlan,

Hi supportlan,

Hi supportlan,