Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to clarify the AnyConnect licensing requirements. I just purchased a ASA5515X with Firepower and Security Plus License. I understood it includes the license to run 2 AnyConnect Premium clients. Show ver confirms this. But it doesn't ap...
I was hoping someone could shed some light on running Firepower right on the ASA vs running on a VM.
We just got two ASA5515-FPWR-K9 units that we want to run in a Active-Passive pair. They have Firepower module version 5.4.0-764 and ASA version 9....
I"m wondering if there is a difference in the POE specs for the C2960S and the C2960X switches. For example here's what the spec sheets say:C2960C-48LPS-L 24ports at 15W or 48ports at 7.7W (or anything in between)C2960X-48LPS-L 24ports at 15W...
I have a group of about 20 subnets that I want to assign a static route to. For example I want traffic destined for any of those 20 subnets to go to a certain next hop. Is it possible to group those objects and create a single route statement for t...
Headquarters has a single router with a single ISP. The Remote site has dual routers both with dual WAN interfaces going to two different ISP's. I am already using IPSLA and HSRP to get failover between the routers and between the dual ISP. Now I ...
Thanks for the help.. I guess that clientless VPN does work without anything additional, I didn't realize that. I actually had a slightly older anyconnect package so I loaded it to the ASA and Anyconnect seems to work fine now. I'll remember I hav...
Is this kinda what you mean?If my LAN is 10.100.50.x Default route is to 2.2.2.2 except traffic destined for 10.1.x.x or 10.2.x.x which would go to 10.100.50.50-------------------------------------------------------ip route 0.0.0.0 0.0.0.0 2.2.2.2acc...
Thanks for the suggestion,I tried just setting simple crypto map to both interfaces. But the problem is that the VPN isn't terminated on the HSRP vip, it's terminated on the interface IP of the active interface. So on the HQT router instead of havi...
Thanks for the input,I think I was able to trace down the issue. It turned out to be a device at another companies network that is connected via fiber to one of our switch ports. It looks like their router was replying to traffic sent to the new ha...
So with the WAP321 the client disconnects/reconnects as you explained. Kinda like having two different wifi networks they just happen to have the same SSID and password.How does the AP541N compare to that? Does it do the same thing or is it viewed ...
