Hi,Seems the "ipv6 address dhcp default" command is not supported on my ASA 5520.How do I get an IPv6 global address (as well as ::/0 default route) from my ISP?Cisco Adaptive Security Appliance Software Version 9.1(7)32Device Manager Version 7.3(1)1...
Hi, since passes/failed authentications are not vissible anymore due to lack of flash player support, I am looking for the CLI command to view passed or failed authentications in a friendly way...Can anyone help? Best regards, Peter
Hi,
This is my stack configuration:
switch 1 provision ws-c3850-48t with C3850-NM-4-10Gswitch 2 provision ws-c3850-12s with C3850-NM-4-10Gswitch 3 provision ws-c3850-48t with C3850-NM-4-10G
Now is it possible to create one etherchannel ...
Hi,
I have been using this setup succesfully for years running on CUCM 6 but since I installed a fresh CUCM 8.0 copy everything works fine accept making outgoing calls. There is nothing changed on my Cube up to now.
Setup:
CUCM 8.0.3.21900-8 -> SIP t...
Hi,I am really new to the Nexus 5000 and it's 2148 fex modules. I have no SAN interfaces (FCoE) installed only ethernet interfaces. I understand that qos is enabled default and the trust state of every port is "trust cos".I only want to trust servers...
Palemoon doesn't work for me as well. There must be an CLI command to view passed or failed authentications in a friendly way.Does anyone know? Which file to view via show acs-logs? or something else...
Hi,I experience the same issue with my WLC 2504 and 2702 access points running Software Version 8.5.171.0.Everything works fine for me until I reboot my controller. Than mDNS Policy 1 is automatically checked and I have to un-check it to get my Chrom...
Hi Mark,
Thanks for your reply. I understand but in my situation I will use the TenGig uplink port as a 1 Gig.
using 1 Gig GLC-LH-SM SFP.
So will there be a 4 Gig port-channel as a result or not?
Regards, Peter
Hi,
This is my stack configuration:
switch 1 provision ws-c3850-48t with C3850-NM-4-10Gswitch 2 provision ws-c3850-12s with C3850-NM-4-10Gswitch 3 provision ws-c3850-48t with C3850-NM-4-10G
Now is it possible to create one etherchannel ...