About andrei.goncalves

andrei.goncalves · 05-16-2014

Hi There,I had developed an application that record a message and send the .wav as attached to an e-mail address.1) The send e-mail step has from: and to: fields... is there a way to configure CCO field ?2) Is there any location in the server where I...

andrei.goncalves · 08-23-2013

Hello,I added a username in the Microsoft AD as an extension number (username = 1000) .. but when I resync the CUCM for searching this user, it never goes to CUCM in the User Manag > End UserCurrent filter:(|(sAMAccountName=myuser)(sAMAccountName=100...

andrei.goncalves · 03-25-2013

Hi there,using the command below, I can see the Rejected Connection Counts Due To Connection Limit.Is this count based on remote-office TFO limit ? How can I be sure if this connection limis a problem in the WAAS core or in the remote-office ? I need...

andrei.goncalves · 11-08-2012

Hi There,to upgrade a firmware, I put all files in the remote router's flash, set the TFTP in the phones to the local router so it's possible to upgrade..and it worked.. but in the log it does try to find the Portugal locale.. 004759: Nov 8 19:23:33...

andrei.goncalves · 11-06-2012

Hi there,I few years ago I made a script that play random greeting prompts with play prompt step and pipes || (not sure if that worked)It was something like: play_prompt (prompt1 || prompt2)Not sure how I did it .. and if it really worked.. so I'd l...

andrei.goncalves · 09-19-2013

Hello Juan,I just registered a WPU-7800 wifi phone to the CUCM 8.6 (not the CMExpress).I can receive calls with the phone.. but when I try to place calls, it does not work... I'm using it as a shared line.. not sure if this is the problem...Do you kn...

andrei.goncalves · 11-08-2012

Perfect !I found the file rtl-sccp.jar in the zip file, then I configured the router:# show runtftp-server flash:Portuguese_Portugal/rtl-sccp.jar# show flash30 120119 Nov 8 2012 19:30:48 -03:00 Portuguese_Portugal/rtl-sccp.jarThanks !Andrei.

andrei.goncalves · 11-05-2012

Hi Jaime, thank you for your reply.I need to tell that it's a little bit frustrating... I mean... IP Phone services exists since forever and still it seems that there are not that many working example as I expected ... it's always necessary to ask a ...

andrei.goncalves · 09-24-2012

Hello Anand,I noticed that the "Touch Tones" checkbox is already disabled and it keeps like that on every new call.. If I check if as mentioned in the manual, ok.. It'll send the DTMF (I can hear in the destination phone).But the sound persist, when ...

andrei.goncalves · 04-16-2012

Michael,it worked !!! Thanks man !!!But, Cisco document ask to change the 25th bit to (1).. and it didn't work.. .I opened then a TAC .. and I received the 26th bit to be changed.Cisco document: 0x91000400 (didn't work)After TAC: 0x92000400 (worked...

Member Since	‎11-27-2003 04:27 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	301
Total Helpful Votes Received	19

User Statistics

User Activity

ccx attached e-mail server location

Cannot find Username as a Number (LDAP search)

Rejected Connection Counts Due To Connection Limit

Locale Update 6921

Random Prompt with pipes

Re: Is it possible to integrate 3rd party WiFi phones with UC Manager Express 8.6?

Re: Locale Update 6921

IP Phone Services Security

Disable sound while tranfer

Re: ATA-187 Disable / Prevent Speed Dials