About Adrian Lazar

Adrian Lazar · 08-28-2019

Hi all, We are using ISE to deploy IP-SGT mappings to several switches and we just observed that after the deployment the switch config is not saved automatically (by ISE). Obviously if the config is not saved manually and a power outage occurs then ...

Adrian Lazar · 05-25-2018

Dear Community, We are trying to do a TrustSec SGT enforcement PoC using Catalyst 3850 and 4500X switches and Monitor Mode. At the moment all policies downloaded from ISE are in Monitor Mode only and the switches are behaving correctly meaning enfo...

Adrian Lazar · 03-23-2015

Hi, I am trying to setup ZTD with two types of ISR routers, C891/892 and C891-24x - also known as the swouter - but I am having a hard time so far. I tried USB ZTD and AutoInstall options as described in the document below but it seems that the route...

Adrian Lazar · 04-14-2014

Hi, This is related to bug CSCum09831 - jumbo MTU does not work on 2232 FEXes unless it is configured globally. Currently we have several qos groups with jumbo MTU enabled on only one of them and this setup works fine on 2148 FEXes but not on the 22...

Adrian Lazar · 03-26-2014

Hi, We have several CUCM servers that are using the same ELM licensing server and now we want to upgrade one Call Manager server from 9.1.1 to 9.1.2. All the other servers and ELM will remain at 9.1.1. Is this setup compatible ? Will the 9.1.2 CUCM s...

Adrian Lazar · 05-02-2014

Hi Seemab, When you say to enable jumbo frames globally you mean to enable them on every qos-group? thanks,Adrian

Adrian Lazar · 08-27-2013

Hi Joseph,We implemented the above policies on an ASR 1001 and sometimes we receive the below error : 002284: Aug 23 12:11:53.534 GMT: %HA_EM-6-FMPD_CONTEXT_SAVE: Failed to save variable context for key RTRCTXT: 'Embedded Event Manager' detected the ...

Adrian Lazar · 04-08-2013

Hi Alex,Thanks for the fast answer. Is this ANM limitation (aprox. 11000 log entries ) documented somewhere ? Can the maximum log entries value be increased to more than the 11000 entries that I am seeing now with the default config? I agree that ANM...

Adrian Lazar · 02-20-2013

Hi Valentin,If you disable SIP from Network Services the status of the ISDN Link will become "Error - Not registered to H320 device" and the option of using H320 to dial out will dissapear. This makes me think that SIP is still used between the SX20 ...

Adrian Lazar · 02-20-2013

Thanks Patrick and ValentinI removed all the dummy SIP configuration and used the H320 protocol to dial out and it worked. I was able to call my mobile.So if SIP is not used anymore between the SX20 and ISDN Link this means we can safely disable it o...

Member Since	‎11-25-2010 11:16 AM
Date Last Visited	‎09-04-2019 01:41 AM
Posts	47

User Statistics

User Activity

IP-SGT Mapping Deployed from ISE - config saving

TrustSec SGACL Monitor Mode

Zero Touch Deployment ( ZTD) Cisco ISR

Jumbo MTU on Nexus 2232 FEX

ELM Compatibility with different versions of CUCM

Hi Seemab, When you say to

eem script monitor routing table - multiple entries into 1 email

ANM as syslog server

SX20 and ISDN Link with TC6

SX20 and ISDN Link with TC6