Hello All, My CUCM version is 12.5.1.15900-66. Both ceritificates of CallManager -trust and CAPF-trust(issued by CAP-RTP-001) will expire. According to Cisco documents, it is NOT possible to regenerate them. I have some questions as follow. 1. ...
Hello All, I still have a question. Which is the best choice when I can modify a calling number and called number in Route Pattern or in Route List? Why?
Hello All My CUCM is Ver.12.5. There is a SIP trunk between the CUCM and another PBX as the attached picture. I met a requirement. The outbound calls from 1XXX on PBX are routed to VG A through SIP Trunk. The outbound calls from 2XXX on PBX a...
Hello All My CUCM is 12.5. it connected to another PBX through SIP Trunk. I configured DSP that include G711 and G729 for all Phones. I found that INVITE only has G.729 when I make a call to the PBX through the SIP Trunk. Can I add G.711 in ...
Hello All Currently we connect to E1 PRI of telephone provider with Cisco 4321. I want to change the VG to CUBE, since we want to integrate with MS office 365 Teams Phone system. We have an E1 line with 300 DID. We want to route 200 numbers to MS...
Hello Roger Kallberg, Thanks for your suggestion! What made you decide not to integrate CUCM and MS Teams ? Is it technical reason? Are there some risk?
Hi, Thanks for your reply! I checked all settings you mentioned, but it still can't work. Finally, I removed the desk phone from rmcm application user. Agent can log in to finesse with Cisco Jabber. It's not perfect, but it is only solution.