Hello,
I have 3 WLC, and have problems to register APs with MIC SHA2 only in WLC1. The difference with the others is in "show sysinfo"...
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.Product Nam...
Hi, I have problems with clients authenticated with ISE Dot1x MAB. The client MAC appears on two different switch and declared as static. There is no loop. ##### Client in port F0/32 309c.237b.97e6 ###SW-1-P8-FRCN(config)#do show run interf fastEthe...
Hola,
Necesito entregarle la opcion 43 a mis APs desde un switch Huawei con DHCP. ¿Alguien sabe el formato?
Estoy probando con:
option 43 hex [HEXA_IP_WLC]
Muchas Gracias
Hello, I am ClaudioI have problems with register the APs in the module WiSM, the AP join statistics is null.The IPs from APs are local DHCP in the module.The softtware version in the WiSM is 7.0.116. The APs are 1140. The IOS version on the Cat6500 i...
Hello,
The sysinfo you showed is running 8.3.150.0 - is that the one which is not working? Yes, in all WLCs the version is 8.3.150, but only in WLC1 not working.
What version are the other 2 WLCs running? 8.3.150Are they all the same model of WLC - w...
Thanks for your answers, these days all of them are teleworking, I will apply to change the served time for 300 seconds. Results may be delayed. Regards.
David, Thanks for you help but the option 43 is not the problem, becouse I replaced the module WiSM for a apliance 4402 and the APs joined succsessfully.URA_NUNOA_SW_6500_CLH#show wism statusService Vlan : 209, Service IP Subnet : 172.20.1.177/255....
The option 43 is......ip dhcp pool APsnetwork 172.23.24.0 255.255.255.0default-router 172.23.24.1option 43 hex f108ac140194ac140196The problem is not the option 43, the problem is between the module WiSM and SUP720. I Replace WiSM for a WLC4402 and A...