Hi.I created a SSID in a cisco 1131, with WPA2 with AES. But my iphone doesnt connect to the wifi network.Some idea?dot11 ssid XXXXX authentication open authentication key-management wpa version 2 wpa-psk ascii 7 120F0C0113070D14232E203A32!int...
Hi!I have a Cisco 2800 series and it doesnt boot, only shows this message in the CLI>Bad RAM at location 0xA0000304: wrote 0xA0000304, read 0xA0000004What means this?I have to chage the RAM?Regards.
I have a Cisco WLC 5508, and it crashed, and this is the message of the crash:"Analysis of Failure: Software was stopped by the reaper for the following reason: Reaper Reset: Task "apfMsConnTask_4" taking too much cpu: 100% (user 18%, system 81...
I have an cisco AP 1242, with only one SSID. On that SSID I have 20 Laptops. If I create a new SSID, and move 10 of that 20 laptops in the new SSID could be better?Regards.
When I connect the fiber to the port module (C3KX-NM-1G) gi 1/1/1 the port doesnt work, and the led are off. this is the sho interface gi 1/1/1GigabitEthernet1/1/1 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet, address is...