I am configured HA in mobility Express I have the mobility Express solution working correctly with an AP Master and the rest are slaves. I configure the HA, it takes the role of Mobility Express and everything works fine I turn off the Primary and...

Hi I have mobility express with an AP1832I as master and APs 1832I and 1852I as slaves. everything was working fine but there are APs that disassociate and re-associate with each other in 1 or 2 mins. The version I have is 8.10.151. I see that  comun...

I have the CUCM 10 and i want to integration with ASTERIK, the ASTERIK is the Gateway for the another extension. I configure que SIP trunk fot the port 5060, for the PSTN Calls the Asterik is the Gateway. In the CUCM the SIP trunk is UP, but when dia...

hi I have a CMX (10.3.0-62), On the CMX the Service "Connect & Engage" work with a portal and login the users and i can see the information in the dashboardThe issue that the CMX can not see the active Devices but the WLCs that register are active a...

Hi I want to integrate the Bosch  LBB 1990/00 to Cisco gateway 4351 for the service paging. I do not know what kind of card would I use to work the two parts Has anyone done any integration between Bosch and Cisco? thanks