Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
For the local logging of the chat history. Is the limit 99 total? so if I have 5 different threads going and one thread hits 99, does it delete the IMs from the other threads? Or is it 99 per thread/conversation?
After loading 9.2.3S on CUCM 8.6.1, my phones will only update some of their config.I've looked at the settings on the phone and noticed the following. The ITL file is not there and the TFTP server is not listed. The status messages show a TFTP erro...
I know this is a stupid question. But I'm relativly new to the UCS servers. I have a C210 and set the CIMC NIC to active/active. I put the same NICs in a team in VMWare as well. the load-balancing hash is set to src-mac on both the switch and VMWare....
I know that Cisco is due to release an update (CYQ4) that allows vm msgs in UCxn to be sent to a user's exchnage inbox. My question is about whether that update will allow the Mobile Message Access feature to work as well. I would think that Blackber...
does any know if the Cisco VPN client and AnyConnect client is supported on the for the same ASA using the same laptop?I had the VPN client working and clientless SSL working. But once I used AnyConnect on my laptop, the VPN client stopped working.Th...
Hi All,I had issues with the OS admin and password on a prduction cluster and in my lab. There seems to be issues if you create CLI accounts besides the one from install. This is how I got it to workProduction Cluster1) created GUI admin account with...
The question that I have is how MRA fits into this. Are devices connecting via MRA still considered IP endpoints. Are they allowed the calling privileges as on-net endpoints? Or are the considered a PSTN call leg? I have a customer in India that is ...
I've found that if you don't specify a mask in the LDAP directory settings, the DN from AD is not imported. You can specify a mask of Xs to match the string length in the AD attribute you are syncing from.If you don't do this, you have to build a DN ...
did you try a different phone firmware (9.3 or 94)? check the following.1) There is no ITL file on the phone, if so, delete it.2) check the network settings on the phone. ensure the IP, subnet mask, gateway, DNS, and TFTP server settings are correct....
