Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We're looking at upgrading our PCCE from 11.5 to 11.6 due to the EOS next year and not ready to fully pull the trigger on 12.5. Just wondering if anyone has done a 11.5 -> 11.6 upgrade and what the difficulty level is? Risk level? Is the end-user e...
Here is my current setup
* main location with Firepower 2100 and Internet with DMZ/Servers. Default route for all networks goes to this firewall.
* new location with Firepower 2100 and Internet with DMZ.
Trying to setup a NAT from a DMZ IP Address...
Working on setting up a Websense V5000 with our Cisco 6509. We'd like to monitor all traffic/protocols going out to the Internet so I setup a mirror port from the port on the 6509 that the Inside interface on our ASA 5520 is plugged into and made th...
We just recently upgraded the CSC module from version 6.2.1599.6 to 6.3.1172.0. It was running fine, but ever since then we've been getting occasional web timeouts and slow loading. No other config changes have been made.In my syslog I'm seeing the...
So I'm working on a project at work with Multicasting. This is the first time I've experienced multicasting so bear with me.A friend at a different company said that it's a pretty simple process and you just turn on ip-multicasting on the main switc...
Understood. The max allowed being 16GB threw me off and I did want to try using 16GB as our SMA seems a little sluggish running certain queries/reports but I didn't want to run an unsupported config. If I can change to 16GB and safely ignore the al...
Hey Ken,Docs aren't super clear in that regard and that's where my confusion is... if you read the release notes it only discusses the M600V: "From AsyncOS 15.0 release onwards, there is a new RAM value for the M600V Secure Email and Web Manager virt...
SriramV,Sorry for pulling up an old post but what if we've already upgraded to version 15.x and THEN increased the memory? Our C300V appliances took the change but we upgraded our M300V to 16GB after the upgrade and it's alerting that there is a mis...
Regarding this part: "Enabling the Advertise G.722 Codec parameter causes interoperability problems with UCCX CAD, call park and ad hoc conferences. Keep it disabled." Is this still accurate for year 2020 and versions 11.5+ running Finesse, etc? We a...
