Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good Afternoon,Is there an easy way to convert Webex Events (Classic) to the new Webex Webinar?Have found that a number of things work differently (e.g. Need plugins in browser in the older Classic Event, have to share via Multimedia to share video &...
HelloDoes anyone what the connector type is used for the HD-SDI on the Webex Room 70 Dual G2?We have a microscope camera box which supports HD-SDI with a standard BNC but struggling to find what the connector type is on the 70 Dual G2 to get a suitab...
*.wbx2.com wildcard certificate expired
Our CUCM 11.5 SU5 setup is alerting that the Security Certificate for *.wbx2.com wildcard certificate has expired.
Where can the new certificate be obtained from?
This is a Cisco domain. The only ...
Hello All,
We have some VG320 analogue gateways are part of our CUCM 11.5 platform.
Most of our setup is SIP (78XX and 88XX handsets, links to other PABX using SIP via ISR4331 CUBEs and DDI inbound and outbound using SIP from provider via CUBEs).
O...
Nutanix AHV is not supported on BE6K or BE7K appliances.Only ESXi and, when available, NFVIS-For-UC.https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/Solution-guide-virtualization-guide/Cisco-Virtualization-Guide-for-Cisco-On-premises...
You could set the busy trigger to 1 and the maximum number of calls to be at least 2.Once they are on a call, any callers will receive then receive a busy / engaged tone.Maximum number of calls should be set to 2 or greater, otherwise they won't be a...
