Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an internal problem due to a third party that is causing TCP session resets to not reach my boarder ASA. This is causing me problems on the Internet side as these connections hang around for up to 5min which appears to be the minimum TCP timeo...
I was wondering if in CUCM there is an easy way to generate an email alert when for example someone dials 911 or an international number?For 911 it would be particularly nice to notify reception and other staff.
I have a strange situation:Host A is physical and connected to a switch port directlyHost B is virtual (VMWARE) and is on a vSwitch which is connected directly to the same switch as host ASpanning the ports these hosts use I am finding something stra...
I am having intermittant issues with calls that come in from a PRI through a call router then are sent to a 3rd party system via SIP trunk.Doing Q931 debugging on the routers to a syslog server I can see calls that ring in but instead of seeing an AL...
Calls comming over one of my sip trunks get translated to a single number due to some source devices not haveing a number... The CDR reports all show just this number.Is there any way I can log the actual origonal sip transations to an external SYSLO...
Source and target IP obviscated to protect the innocent. The flags are the same for each of the connections related to this issue. TCP Outside:1.1.1.1/443 transit-Inside:10.x.x.x/2674, flags UFRIO, idle 4m59s, uptime 5m1s, timeout 5m0s, ...
Given the massive amount of user confusion this plugin causes I would suggest just using smart tunnel and the REAL RDP Client.. You can create application specific client filters for both the Windows RDP client and Microsofts Official Client on Mac, ...
